For heating objects outdoors (roofs, pipelines, etc.) without the use of control equipment, at low mechanical loads of the cable (class M1).
Operating temperature of cable operation, no more than 80 ° С.
A heating cable in which two conductive cores in a special semiconductor matrix, with elastomer insulation, with protective elements - a braid shield made of copper wire and a sheath made of light-stabilized PVC compound with increased heat resistance.
To connect to the network has an attached power cable with a cross section of 3 * 1kv. mm with euro plug. The tightness class of the connection is IPX7.
Temperature range:
- during installation and laying: at temperatures below - 5 ° C, the cable can be connected to the network for heating;
- during operation (fixed installation): from - 40 ° С to + 50 ° С;
bending radius: not less than 25 mm;
- tensile force: not more than 120 N;
- resistance to deformation by force, for cables of class M1: no more than 600 N.
TU B 31.3-05758730-084: 2012
IEC 800
Specific power 23 W / m at 10 ° C and 220 V.
Available in lengths: 1, 2, 3, 4, 5, 6, 8, 10, 13, 17, 21, 24, 28, 34, 45, 55.
Electrical the screen resistance to direct current, calculated per 1 km of length and a temperature of 20 ° C, should be no more than 34.5 Ohms.
The electrical insulation resistance of the product, measured over 60 seconds with a voltage of 1000 Volts, at a temperature of 20 ° C - not less than 1 MOhm.
SELF-REGULATING HEATING CABLE WOKS 23W/m (10 °С) ODESKABEL
Подробнее: http://woks.ua
Estimated cable dimensions (reference), mm: 8.8x6.5.
Estimated mass of the cable (informative), kg / km: 79.2.